GangingPlan

"""A ganging layout plan (N-up mode)"""
type GangingPlan {
  """Rows of items in the step-and-repeat grid"""
  rows: Int!
  """Columns of items in the step-and-repeat grid"""
  cols: Int!
  """Items placed per sheet side (rows × cols)"""
  pagesUp: Int!
  """
  Press sheets needed for the requested quantity: ceil(quantity ÷ pagesUp). 1 when no quantity was supplied.
  """
  sheetsRequired: Int!
  """
  Substrate this plan gangs onto; its sheet size is what the grid was fitted against
  """
  substrate: SubstrateInput!
  """
  Sheet orientation the fitter settled on (portrait or landscape). Both sheet rotations are tried; the one yielding the most ups wins.
  """
  orientation: ImpositionOrientation!
  """
  Sheet area covered by the ganged cells, as a ratio in 0.0–1.0 — NOT a 0–100 percentage. 0.86 means 86% of the sheet area is covered. Computed as used cell area ÷ total sheet area, where a cell is the finished size plus bleed on all sides.
  """
  utilisation: Float!
  """Horizontal gap between adjacent columns, in mm (as requested)"""
  gutterH: Length!
  """Vertical gap between adjacent rows, in mm (as requested)"""
  gutterV: Length!
  """Full sheet placement geometry for rendering"""
  layout: SheetLayout!
}